•
Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number
that you enter would create a call forwarding loop or would exceed the maximum number of links
permitted in a call forwarding chain.
•
When you switch an in-progress call from your mobile phone to Cisco Unified devices that share the
same line (Session Handoff), the Call Forward feature is disabled on the Cisco Unified devices. The
Call Forward feature returns when the call ends.
•
When Call Forward is in effect, look for:
◦
Alternating call forwarding icons displayed next to your phone number.
◦
The call forward target number in the status line.
Related Topics
User Settings on Web, on page 77
User Options Web Pages, on page 69
Set Up and Cancel Call Forward All from Phone
Procedure
Step 1
To set up Call Forward All, press CFwdALL and enter a target phone number.
The phone displays visual indications that the phone is forwarding all calls.
Step 2
To cancel Call Forward All, press CFwdALL.
The phone display removes the visual indications that the phone is forwarded.
Set up or Cancel Call Forward Remotely
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your call forwarding settings.
Do Not Disturb
Do Not Disturb (DND) turns off all audible and visual notifications of incoming calls. Your system administrator
enables DND on your phone.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
25
Calling Features
Set Up and Cancel Call Forward All from Phone
To Next Page
Loading...
Need help?
General
