Cisco 7906G User Manual

Join Together Two Existing Conferences
Check with your system administrator to see if this feature is available to you.
Procedure
Use the Join or DirTrfr softkeys.
Barge Conference
You can create a conference by using cBarge to add yourself to a call on a shared line
Related Topics
Shared Lines, on page 36
Create Conference by Barging Call on Shared Line
Procedure
Highlight the call and press cBarge to complete the action.
Meet Me Conference
Meet Me conferencing allows you to start or join a conference by calling the conference number.
Tip
•
If you call a secure Meet Me conference number from a nonsecure phone, your phone displays the
message Device Not Authorized. For more information, see Secure Calls, on page 38.
•
A Meet Me conference ends when all participants hang up.
•
If the conference initiator disconnects, the conference call continues until all participants hang up.
Start Meet Me Conference
Participants cannot join the conference until the initiator starts the conference.
Procedure
Step 1
Obtain a Meet Me phone number from your system administrator.
Step 2
Distribute the number to participants.
Step 3
When you are ready to start the meeting, go off-hook to get a dial tone, then press MeetMe.
Step 4
Dial the Meet Me conference number.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
29
Calling Features
Barge Conference

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English