Here are a few examples:
router# show controllers optics 100/3/0/2 pm history 15-min optics 12 bucket 4
router# show controllers optics 100/3/0/2 pm history 24-hour optics 5
OTU Controller
The following command displays the current performance parameters of an OTU controller for 15-minutes
and 24-hour intervals:
show controllers [ OTU4 | OTU2e ] R/S/I/P pm current [ 15-min | 24-hour ] [ fec | otn ]
Here is an example:
router# show controllers OTU4 100/3/0/2 pm current 15-min otn
The following commands display the historical performance parameters of an OTU controller for 15-minutes
and 24-hour intervals:
show controllers [ OTU4 | OTU2e ] R/S/I/P pm history 15-min [ fec | otn ] bucket-number
bucket-number is a number between 1 and 32.
show controllers [ OTU4 | OTU2e ] R/S/I/P pm history 24-hour [ fec | otn ]
Here are a few examples:
router# show controllers OTU4 100/3/0/2 pm history 15-min fec 4
router# show controllers OTU4 100/3/0/2 pm history 24-hour otn
ODU Controller
The following command displays the current performance parameters of an ODU controller for 15-minutes
and 24-hour intervals:
show controllers [ ODU4 | ODU2e ] R/S/I/P pm current [ 15-min | 24-hour ] otn pathmonitor
Here is an example:
router# show controllers ODU4 100/3/0/2 pm current 15-min otn
The following commands display the historical performance parameters of an ODU controller for 15-minutes
and 24-hour intervals:
show controllers [ ODU4 | ODU2e ] R/S/I/P pm history 15-min otn pathmonitor bucket-number
bucket-number is a number between 1 and 32.
show controllers [ ODU4 | ODU2e ] R/S/I/P pm history 24-hour otn pathmonitor
Here are a few examples:
router# show controllers ODU4 100/3/0/2 pm history 15-min otn pathmonitor 4
router# show controllers ODU4 100/3/0/2 pm history 24-hour otn pathmonitor
Ethernet Controller
The following command displays the current performance parameters of an ethernet controller for 15-minutes
and 24-hour intervals:
show controllers [ hundredGigECtrlr | tenGigECtrlr ] R/S/I/P pm current [ 15-min | 24-hour ]
Here is an example:
router# show controllers hundredGigECtrlr 100/3/0/2 pm current 15-min
The following commands display the historical performance parameters of an ethernet controller for 15-minutes
and 24-hour intervals:
show controllers [ hundredGigECtrlr | tenGigECtrlr ] R/S/I/P pm history 15-min bucket-number
bucket-number is a number between 1 and 32.
show controllers [ hundredGigECtrlr | tenGigECtrlr ] R/S/I/P pm history 24-hour
Here are a few examples:
router# show controllers hundredGigECtrlr 100/3/0/2 pm history 15-min 4
router# show controllers hundredGigECtrlr 100/3/0/2 pm history 24-hour
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
126
Configuring the Performance Monitoring Thresholds for the Satellite nV Optical System
Displaying the Performance Monitoring Parameters of a Controller