Configured satellite fabric links:
TenGigE0/2/0/6
--------------
State: Satellite Ready
Port range: GigabitEthernet0/0/0-9
TenGigE0/2/0/13
---------------
State: Satellite Ready
Port range: GigabitEthernet0/0/30-39
TenGigE0/2/0/9
--------------
State: Satellite Ready
Port range: GigabitEthernet0/0/10-19
Output of Status Check
This example shows the output of show nv satellite status command for a Satellite configured in dual home
network topology.
RP/0/RSP0/CPU0:router# show nv satellite status
Satellite 100
-------------
Status: Connected (Stable)
Redundancy: Active (Group: 10)
Type: asr9000v
Description: sat100
MAC address: 4055.3958.61e4
IPv4 address: 100.100.1.2 (VRF: default)
Serial Number: CAT1604B1AN
Remote version: Compatible (not latest version)
ROMMON: 126.0 (Latest)
FPGA: 1.13 (Latest)
IOS: 322.5 (Available: 322.3)
Configured satellite fabric links:
TenGigE0/1/0/0
--------------
Status: Satellite Ready
Remote ports: GigabitEthernet0/0/30-43
TenGigE0/1/0/1
--------------
Status: Satellite Ready
Remote ports: GigabitEthernet0/0/0-29
This example shows the sample output of a satellite interfaces over redundant ICL.
RP/0/RSP0/CPU0:router#show sits interface gig 300/0/0/0
Interface Name : GigabitEthernet300/0/0/0
Interface IFHandle : 0x020058a0
Base Interface : TenGigE0/0/0/0
Base Interface IFHandle : 0x000001c0
LAG Hash Index : 2
Published Base interface : TenGigE0/0/0/0
Published Base ifh : 0x000001c0
Published LAG Hash : 2
Sat Interface State in DB : Republish Success
This command shows a sample output whether the bundle over bundle satellite interface is replicated.
RP/0/RSP1/CPU0:router# show bundle infrastructure ea bundle-ether 101 detail
Bundle-Ether101
Node Platform Information
----------- ----------------------
0/0/CPU0 Ifhandle : 0x02004d60
Channel Map : 0x3
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
57
Configuring the Satellite Network Virtualization (nV) System
Monitoring the Satellite Software
To Next Page
Loading...
Need help?
General
