EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series System Configuration Guide

Cisco ASR 9000 Series
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
PurposeCommand or Action
Specifies an interface as an Interface Control Plane
Extender(ICPE) inter-chassis link (ICL).
satellite-fabric-link satellite satellite_id
Example:
RP/0/RSP0/CPU0:router(config-if-nV)#
satellite-fabric-link satellite 100
Step 13
The Interface Control Plane Extender(ICPE)
infrastructure has a mechanism to provide the
Control Plane of an interface physically located
on the Satellite device in the local Cisco IOS
XR software.
Note
Configures the remote satellite ports 0 to 5.
remote-portsinterface_type remote_subslot
Example:
RP/0/RSP0/CPU0:router(config-satellite-fabric-link)#
remote-ports GigabitEthernet 0/0/0-5
Step 14
Attaches a policy map to an output interface to be used
as the service policy for that interface.
service-policy output policy-map
Example:
RP/0/RSP0/CPU0:router(config-satellite-fabric-link)#
service-policy output policy5
Step 15
commit
Step 16
Offloading Service-policy on Ring Physical SFL
Perform these tasks to offload the service-policy on ring physical Satellite Fabric Link (SFL). This procedure
offloads the service-policy in the egress direction of SFL.
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
91
Configuring QoS on the Satellite System
Offloading Service-policy on Ring Physical SFL

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals