Cisco ASR 9000 Series System Configuration Guide

Example:
RP/0/RSP0/CPU0:router (config-otu1)# pm 15-min otn threshold bber-ne 55
Specifies the PM interval for the OTU controller and set report value for the OTN layer. threshold-type can have one of
the following values:
•
bbe-fe
•
bbe-ne
•
bber-fe
•
bber-ne
•
es-fe
•
es-ne
•
esr-fe
•
esr-ne
•
fc-fe
•
fc-ne
•
ses-fe
•
ses-ne
•
sesr-fe
•
sesr-ne
•
uas-fe
•
uas-ne
Step 5
commit
Configuring the Thresholds for Ethernet Performance Monitoring
Parameters
Perform this task to configure the thresholds for ethernet Performance Monitoring (PM) parameters.
SUMMARY STEPS
1.
configure
2.
controller ethernet R/S/I/P
3.
pm {15-min | 24-hour} ether report threshold-type enable
4.
pm {15-min | 24-hour} ether threshold threshold-type threshold-value
5.
commit
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
130
Configuring the Performance Monitoring Thresholds for the Satellite nV Optical System
Configuring the Thresholds for Ethernet Performance Monitoring Parameters

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English