Cisco ASR 9000 Series System Configuration Guide

!
!
!
Configuring a Satellite nV System in Layer 2 Fabric Network Topology
interface TenGigE0/0/0/0.102
ipv4 point-to-point
ipv4 unnumbered Loopback0
load-interval 30
encapsulation dot1q 102
nv
satellite-fabric-link satellite 300
ethernet cfm
continuity-check interval 10ms
!
redundancy
iccp-group 10
!
remote-ports GigabitEthernet 0/0/0-10
Configuring RADIUS Filter-ID Attribute Direction: Example
The following example shows how to configure RADIUS filter-ID attribute direction:
configure
radius-server attribute 11 default direction inbound
!
Verifying RADIUS Filter-ID Attribute Direction
Use the show running-config aaa command to verify the RADIUS filter-ID attribute direction configuration.
show running-config aaa
radius-server host 10.1.0.3 auth-port 1645 acct-port 1646
key 7 104D000A0618
radius-server attribute 11 default direction inbound
aaa group server radius SG1
server 10.1.0.3 auth-port 1645 acct-port 1646
.
.
.
Configuring nV Satellite Auto Image Upgrade: Example
The following example shows how to configure nV satellite auto image upgrade:
config
nv satellite 100 upgrade on-connect
!
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
72
Configuring the Satellite Network Virtualization (nV) System
Configuring a Satellite nV System in Layer 2 Fabric Network Topology

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English