Cisco ASR 9000 Series System Configuration Guide

CHAPTER 7
Configuring the nV Edge System on the Cisco
ASR 9000 Series Router
This module describes the configuration of the nV Edge system on the Cisco ASR 9000 Series Aggregation
Services Routers.
Table 3: Feature History for Configuring nV Edge System on Cisco ASR 9000 Series Router
ModificationRelease
Support for nV Edge
system was included on the
Cisco ASR 9000 Series
Router.
Release 4.2.1
Support for cluster EOBC
on L2 channel was
included.
Release 5.2.0
•
Prerequisites for Configuration, page 134
•
Overview of Cisco ASR 9000 nV Edge Architecture, page 134
•
Overview of Cluster EOBC on L2 Channel with Topology, page 138
•
Restrictions of Cluster EOBC on L2 Channel, page 138
•
Configuring Intermediate L2 Cloud, page 139
•
Benefits of Cisco ASR 9000 Series nV Edge System, page 143
•
Restrictions of the Cisco ASR 9000 Series nV Edge System, page 144
•
Implementing a Cisco ASR 9000 Series nV Edge System, page 144
•
Configuration for nV Edge System, page 146
•
Cisco ASR 9000 Series Router nV Edge System Scripted Rack-by-Rack Upgrade, page 147
•
Cisco ASR 9000 Series nV Edge System Rack-by-Rack Upgrade, page 149
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
133

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model