Cisco ASR 9000 Series System Configuration Guide

These features are included on Cisco ASR 9000v
and Cisco ASR 901 satellites:
•
Support for Simple Ring Satellite nV topology
was included.
•
Support for dual-homed Satellite nV network
architecture was included.
•
Support for Layer 2 Fabric network architecture
was included.
•
Support for Fabric Ethernet Connectivity Fault
Management (Ethernet CFM) was included.
•
Support for 1G ICL on ports 1/45 and 1/46 on
Cisco ASR 9000v satellite was included for all
the Satellite nV topologies by using 1G SFPs.
•
Support for these new satellites was included:
◦
Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet-only
interfaces, 10 GE, DC power, USB
(A901-6CZ-F-D)
◦
Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet and
TDM interfaces, 10 GE, DC power, USB
(A901-6CZ-FT-D)
◦
Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet-only
interfaces, 10 GE, AC power, USB
(A901-6CZ-F-A)
◦
Cisco ASR 901 Series Aggregation
Services Router Chassis, Ethernet and
TDM interfaces, 10 GE, AC power, USB
(A901-6CZ-FT-A)
•
Support for QoS Offload over Satellite was
supported. See Cisco ASR 9000 Series
Aggregation Services Router QoS
Configuration Guide for more details.
Release 5.1.1
•
Support for SyncE in Satellite nV System was
included.
•
Support for new SFPs was included.
Release 5.2.0
•
Support for Cisco ASR 903 Router as satellite
is removed
Release 5.3.0
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
5
Configuring the Satellite Network Virtualization (nV) System

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English