Cisco ASR 9000 Series System Configuration Guide

ASR9000vASR901Parameter
HostHostTrunk interfaces, default, native
VLAN, Double Tagged EFPs
HostHostVLAN ID range
SatelliteSatelliteEFPs matching a single dot1q
VLAN ID
HostHostEFPs matching a single dot1ad
VLAN ID
HostHostEFPs configured with a dot1q
Tunneling Ethertype 0x9100 or
0x9200
SatelliteSatelliteUntagged EFPs
SatelliteSatelliteUnprotected satellite access ports
1 - Satellite
More than 1 - Host
1 - Satellite
More than 1 - Host
Maximum number of MEPs per
Ethernet Flow Point (EFP)
Up to 44 - SatelliteUp to 40 - SatelliteMaximum number of MEPs per
Satellite
Frames from MEPs that exceed the
limit are not processed either on
the satellite or host, and a warning
is logged.
If an unsupported configuration is committed, the CFM PM processing takes place on the host instead of
the satellite. A warning is issued and it can be viewed in the output of the show ethernet cfm
configuration-errors command.
Note
Related Commands
Refer to the Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component
Command Reference guide for details of these related commands:
•
nv satellite sla processing disable
•
show ethernet cfm configuration-errors
•
show ethernet cfm interfaces statistics
•
show ethernet cfm local meps
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
31
Configuring the Satellite Network Virtualization (nV) System
CFM Performance Monitoring

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model