Overview of SyncE in Satellite nV System 47
Restrictions of SyncE in Satellite nV System 48
Hub-and-Spoke Topology for Frequency Synchronization 48
Configuring SyncE on ASR 9000 Hosts 48
Configuration Examples of SyncE on ASR9000 Hosts 49
Upgrading and Managing Satellite nV Software 52
Image Upgrade for Cisco ASR 9000v Satellite 53
Prerequisites 53
Installing a Satellite 53
Converting a Standard Cisco ASR 901 to Satellite 54
Converting a Standard Cisco ASR 903 to Satellite 55
Monitoring the Satellite Software 56
Show Commands for Advanced Network Topologies 58
Dual Home Network Topology 58
Simple Ring Topology 59
Monitoring the Satellite Protocol Status 59
Monitoring the Satellite Inventory 61
Monitoring the Satellite Environment 61
Reloading the Satellite and Monitoring DOM Parameters 63
Port Level Parameters Configured on a Satellite 64
Loopback Types on Satellite Ports 64
Configuration Examples for Satellite nV System 65
Satellite System Configuration: Example 65
Satellite Global Configuration 65
ICL (satellite-fabric-link) Interface Configuration 65
Satellite Interface Configuration 66
Satellite Management Using Private VRF 67
Configuration of Satellite using Auto-IP 67
Satellite Configuration with Dual-Homed Hosts 67
Dual-Home for Multiple Satellites with Single Physical ICLs on Both Hosts and Satellites 68
Dual Home Configuration for SAT1 68
Dual Home Configuration for SAT2 68
Configuring a Satellite nV System in Simple Ring Topology 69
On Host1 69
On Host2 70
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
v
Contents
To Next Page
Loading...
Need help?
General
