Cisco ASR 9000 Series System Configuration Guide

member
neighbor 70.0.0.1
!
!
!
!
mpls ldp
router-id 70.0.0.2
address-family ipv4
discovery targeted-hello accept
!
interface TenGigE0/0/0/1
!
!
Configuring ICCP Interface IP Address on Host A:
interface TenGigE0/0/0/1
ipv4 address 70.0.0.1 255.255.255.0
!
Configuring ICCP Interface IP Address on Host B:
interface TenGigE0/0/0/1
ipv4 address 70.0.0.2 255.255.255.0
!
SyncE Configuration:
In general, the Frequency Synchronization is configured in global mode for Host A, Host B, and downSsream
device (ASR 9000).
Configuring Frequency Synchronization in Global mode on Host A:
By default, QL option 1 is supported with the frequency synchronization configuration in global mode. In
addition, you can also explicitly configure QL option 1 or 2 as:
frequency synchronization
quality itu-t option 2 generation 2
!
Configuring Frequency Synchronization in Global mode on Host B:
frequency synchronization
quality itu-t option 2 generation 2
!
Configuring Frequency Synchronization in Global mode in downstream Device (ASR 9000):
frequency synchronization
quality itu-t option 2 generation 2
clock-interface timing-mode system
!
Configuring Clock Interface on Host A:
clock-interface sync 0 loca 0/RSP0/CPU0
port-parameters
bits-input e1 crc-4 sa4 hdb3
!
frequency synchronization
selection input
priority 1
wait-to-restore 0
ssm disable
quality receive exact itu-t option 2 generation 2 PRS
!
!
Configuring Clock Interface on Host B:
clock-interface sync 0 loca 0/RSP0/CPU0
port-parameters
bits-input e1 crc-4 sa4 hdb3
!
frequency synchronization
selection input
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
51
Configuring the Satellite Network Virtualization (nV) System
Configuration Examples of SyncE on ASR9000 Hosts

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English