Index
IN-5
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-12
client mode, VTP 17-3
clock
See system clock
clusters, switch
described
6-1
managing
through CLI
6-4
through SNMP 6-4
planning considerations
CLI
6-4
SNMP 6-4
cluster standby group, requirements 6-2
command-line interface
See CLI
command modes
2-1
commands
abbreviating
2-4
no and default 2-4
setting privilege levels 8-8
command switch
configuration conflicts
31-13
defined 6-1
password privilege levels 6-4
recovery
from failure
31-10
from lost member connectivity 31-13
replacing
with another switch
31-12
with cluster member 31-10
requirements 6-2
See also candidate switch, cluster standby group,
member switch, and standby command switch
community strings
configuring
27-8
for cluster switches 27-4
overview 27-4
config.text 4-12
configurable leave timer, IGMP 20-5
configuration
controller for LRE upgrade
12-25
global LRE 12-25
configuration examples, network
collapsed backbone and switch cluster
1-16
design concepts
cost-effective wiring closet
1-13
high-performance workgroup 1-13
network performance 1-12
network services 1-12
redundant Gigabit backbone 1-13
hotel network 1-17
large campus 1-21
long-distance, high-bandwidth transport
configuration
1-24
service-provider central-office network 1-20
small to medium-sized network 1-15
configuration files
clearing the startup configuration
B-19
creating using a text editor B-10
default name 4-12
deleting a stored configuration B-19
described B-8
downloading
automatically
4-12
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-13
using RCP B-17
using TFTP B-11
guidelines for creating and using B-9
invalid combinations when copying B-5
limiting TFTP server access 27-14
obtaining with DHCP 4-8
password recovery disable considerations 8-5
specifying the filename 4-12
system contact and location information 27-14
types and location B-10
To Next Page
Loading...
