Cisco Catalyst 2950 - Page 672

Index
IN-30
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-12
vlan database command 16-6
vlan global configuration command 16-6
VLAN ID, discovering 7-26
VLAN management domain 17-2
VLAN Management Policy Server
See VMPS
VLAN membership
confirming
16-28
modes 16-3
VLAN Query Protocol
See VQP
VLANs
adding
16-8
adding to VLAN database 16-8
aging dynamic addresses 13-9
allowed on trunk 16-19
and spanning-tree instances 16-2, 16-6, 16-12
configuration guidelines, normal-range VLANs 16-5
configuration options 16-6
configuring 16-1
configuring IDs 1006 to 4094 16-12
creating in config-vlan mode 16-8
creating in VLAN configuration mode 16-9
default configuration 16-7
deleting 16-10
described 10-3, 16-1
displaying 16-14
extended-range 16-11
illustrated 16-2
modifying 16-8
native, configuring 16-20
normal-range 16-1, 16-4
parameters 16-4
port membership modes 16-3
static-access ports 16-11
STP and IEEE 802.1Q trunks 13-10
supported 16-2
Token Ring 16-5
trunks, VLAN 1 minimization 16-19
VTP modes 17-3
VLAN Trunking Protocol
See VTP
VLAN trunks
16-14
VMPS
administering
16-30
configuration example 16-31
configuration guidelines 16-26
default configuration 16-26
description 16-24
dynamic port membership
described
16-25
reconfirming 16-29
troubleshooting 16-30
entering server address 16-27
mapping MAC addresses to VLANs 16-25
monitoring 16-30
reconfirmation interval, changing 16-29
reconfirming membership 16-28
retry count, changing 16-29
voice VLAN
Cisco 7960 phone, port connections
18-1
configuration guidelines 18-3
configuring IP phones for data traffic
override CoS of incoming frame
18-5
trust CoS priority of incoming frame 18-6
configuring ports for voice traffic in
802.1p priority tagged frames
18-4
802.1Q frames 18-4
connecting to an IP phone 18-3
default configuration 18-2
described 18-1
displaying 18-6
VQP 16-24
VTP
adding a client to a domain
17-15
advertisements 16-17, 17-3
and extended-range VLANs 17-1
and normal-range VLANs 17-1