Cisco CATALYST 2960 User Manual

11-5
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
Chapter 11 Configuring Web-Based Authentication
Understanding Web-Based Authentication
Figure 11-3 Customized Web Banner
If you do not enable a banner, only the username and password dialog boxes appear in the web
authentication login screen, and no banner appears when you log into the switch, as shown in
Figure 11-4.
Figure 11-4 Login Screen With No Banner
For more information, see the Cisco IOS Security Command Reference and the “Configuring a Web
Authentication Local Banner” section on page 11-16.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)