Cisco CATALYST 2960

Index
IN-18
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
stack master functions 35-6
Stateless Autoconfiguration 35-4
supported features 35-2
IPv6 traffic, filtering 37-3
J
join messages, IGMP 21-3
L
LACP
See EtherChannel
Layer 2 frames, classification with CoS
33-2
Layer 2 interfaces, default configuration 12-24
Layer 2 traceroute
and ARP
39-16
and CDP 39-16
broadcast traffic 39-16
described 39-16
IP addresses and subnets 39-16
MAC addresses and VLANs 39-16
multicast traffic 39-16
multiple devices on a port 39-17
unicast traffic 39-16
usage guidelines 39-16
Layer 3 features 1-15
Layer 3 interfaces
assigning IP addresses to
34-4
assigning IPv6 addresses to 35-7
changing from Layer 2 mode 34-4
Layer 3 packets, classification methods 33-2
LDAP 4-2
Leaking IGMP Reports 19-4
LEDs, switch
See hardware installation guide
lightweight directory access protocol
See LDAP
line configuration mode
2-2
Link Aggregation Control Protocol
See EtherChannel
link failure, detecting unidirectional
17-8
Link Layer Discovery Protocol
See CDP
link local unicast addresses
35-3
link redundancy
See Flex Links
links, unidirectional
24-1
link-state tracking
configuring
38-23
described 38-21
LLDP
configuring
26-5
characteristics 26-6
default configuration 26-5
enabling 26-6
monitoring and maintaining 26-11
overview 26-1
supported TLVs 26-2
switch stack considerations 26-2
transmission timer and holdtime, setting 26-6
LLDP-MED
configuring
procedures
26-5
TLVs 26-7
monitoring and maintaining 26-11
overview 26-1, 26-2
supported TLVs 26-2
LLDP Media Endpoint Discovery
See LLDP-MED
local SPAN
27-2
location TLV 26-3, 26-7
login authentication
with RADIUS
9-30
with TACACS+ 9-14
login banners 5-11
log messages