Cisco CATALYST 2960

Index
IN-8
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
redirecting error message output 39-21
using commands 39-20
default commands 2-4
default configuration
802.1x
10-35
auto-QoS 33-22
banners 5-11
CDP 25-2
DHCP 20-8
DHCP option 82 20-8
DHCP snooping 20-8
DHCP snooping binding database 20-8
DNS 5-10
dynamic ARP inspection 22-5
EtherChannel 38-11
Ethernet interfaces 12-24
Flex Links 19-8
IGMP filtering 21-25
IGMP snooping 21-7, 36-6
IGMP throttling 21-25
initial switch information 3-3
IP SLAs 32-5
IP source guard 20-15
IPv6 35-7
Layer 2 interfaces 12-24
LLDP 26-5
MAC address table 5-15
MAC address-table move update 19-8
MSTP 17-14
MVR 21-20
optional spanning-tree configuration 18-12
password and privilege level 9-2
RADIUS 9-27
RMON 28-3
RSPAN 27-10
SDM template 8-4
SNMP 30-7
SPAN 27-10
SSL 9-49
standard QoS 33-38
STP 16-13
switch stacks 7-17
system message logging 29-4
system name and prompt 5-9
TACACS+ 9-13
UDLD 24-4
VLAN, Layer 2 Ethernet interfaces 13-15
VLANs 13-7
VMPS 13-25
voice VLAN 15-3
VTP 14-9
default gateway 3-14
default web-based authentication configuration
802.1X
11-9
deleting VLANs 13-9
denial-of-service attack 23-1
description command 12-37
designing your network, examples 1-18
destination addresses
in IPv4 ACLs
31-10
in IPv6 ACLs 37-5
destination-IP address-based forwarding,
EtherChannel
38-9
destination-MAC address forwarding, EtherChannel 38-9
detecting indirect link failures, STP 18-8
device A-24
device discovery protocol 25-1, 26-1
device manager
benefits
1-1
described 1-2, 1-5
in-band management 1-7
upgrading a switch A-24
DHCP
enabling
relay agent
20-9
DHCP-based autoconfiguration
client request message exchange
3-4
configuring