3
Cisco Small Business WRV210 Administration Guide 34
Configuring the Wireless Network
Use the Wireless module to configure your wireless network.
• “A Note About Wireless Security” on page 34
• “Enabling Your Wireless Networks” on page 37
• “Adjusting the Advanced Wireless Settings” on page 45
• “Configuring a Wireless Distribution System (WDS)” on page 47
A Note About Wireless Security
Wireless networks are convenient and easy to install, so homes with high-speed
Internet access are adopting them at a rapid pace. Because wireless networking
operates by sending information over radio waves, it can be more vulnerable to
intruders than a traditional wired network. Like signals from your cellular or
cordless phones, signals from your wireless network can also be intercepted. The
following information will help you to improve your security:
• “Wireless Security Tips” on page 34
• “General Network Security Guidelines” on page 36
Wireless Security Tips
Since you cannot physically prevent someone from connecting to your wireless
network, you need to take some additional steps to keep your network secure.
• Change the default wireless network name or SSID
Wireless devices have a default wireless network name or Service Set
Identifier (SSID) set by the factory. This is the name of your wireless
network, and can be up to 32 characters in length. Linksys wireless
products use linksys as the default wireless network name. You should
change the wireless network name to something unique to distinguish your
To Next Page
Loading...
Need help?
General
