Configuring a Virtual Private Network (VPN)
Managing the VPN Users and Certificates
Cisco Small Business WRV210 Administration Guide 63
5
Managing the VPN Users
The Router supports up to 10 remote users. They use QuickVPN software to
connect to your local network through the VPN tunnel.
STEP 1 Click VPN > VPN Client Access in the navigation tree.
STEP 2 To add a user, enter the username and password, and then click Add/Save.
• User Name: Enter a name for the VPN client.
• Password: Enter a password for the VPN client.
• Re-enter to confirm: Enter the password again to confirm it.
• Allow user to change password? If you want to let the user change his or
her password from the user’s QuickVPN client, select Yes .
STEP 3 If this is the first VPN client you have added, read the warning message and
complete the steps below.