Administration
Managing Access and Configuring Other Management Options
Cisco Small Business WRV210 Administration Guide 86
7
STEP 3 Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
Backing and Restoring a Configuration
Cisco recommends that you periodically back up your configuration. This practice
is especially helpful before you make significant changes in the settings. If you are
dissatisfied with the results, you easily can restore the previous configuration from
your backup file.
Manage these files in the Backup and Restore section of the Administration >
Management page.
STEP 1 Click Administration > Management in the navigation tree.
STEP 2 In the Backup and Restore section, use the buttons to back up or restore your
configuration, as needed:
• To back up your current configuration: Click Backup Configuration. When
the File Download window appears, click Save. Find the location where
you want to save the file, and then click Save. A message appears when the
download is complete. The file is a .bin file. You can change the filename
before saving, if you choose to do so.
• To restore a previously saved configuration: Click Restore Configuration.
click Restore Configuration. When the File Path field appears, type the file
path or click Browse to find the .bin file that you saved in the previous
backup operation. Finally, click Load. After a few minutes, a message
appears: Your changes have been saved. System Rebooting... Please
wait. When the Basic Setup page appears, the process is finished.
STEP 3 Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
To Next Page
Loading...
Need help?
General
