Cisco WRV210 - Wireless-G VPN Router - Restricting Users’ Access to the Internet

Configuring the Firewall
Restricting Users’ Access to the Internet
Cisco Small Business WRV210 Administration Guide 57
4
Restricting Users’ Access to the Internet
By default, the Router’s firewall allows your users to access the Internet. You can
use the Access Restriction page to block or allow specific kinds of Internet usage
and traffic during specific days and times.
STEP 1 Click Firewall > Access Restriction in the navigation tree.
STEP 2 From the Internet Access Policy drop-down list, choose the policy that you want
to configure.You can configure up to eight policies.
NOTE To delete a policy, select the policy, and then click Delete. To view all the
policies, click Summary.