Group 22, Wheels and Tires
SM 765, Nov ’06 Pneumatic Wheels and Tires • 22-2-7
9. Disconnect the air chuck. Use a mallet and hit the
ring to make sure the ring is fully installed.
10. Put the tire in an OSHA-approved safety cage.
Tire-to-Wheel Mounting
Directional-Tread Tires
All directional-tread tires are to be mounted in the correct
position with respect to the arrow cast on the side of the
tire as explained below.
Directional-Tread Single Drive Tires
• Tire arrow to point in the dirction of forward rota-
tion. Rotate wheel to bring arrow on tire above the
wheel center. Arrow must point toward front of
truck.
Inside
Front of truck
To Next Page
Loading...
