Clear-Com Eclipse HX series - Page 164

Eclipse | Upgrade Guide
Page 164
13. Ensure that the panels reset once the download is complete.
14. Confirm the updated firmware version using either:
• The EHX firmware report tool:
- Go to EHX > System > layout.
- Right click the matrix icon.
- Select Firmware > Firmware report.
• The local menu on the panel (display panels only).
14.1.1 Locating Panel *.fwp files on the software USB
Panel type
*.fwp file
i-Station (i-Series)
Drivers USB > ECLIPSE DRIVERS > Panel_Software > i-
Station > xxxxxx-i-Station App (where xxxxxx represents
the product number)
Note:
Clear-Com recommends that you upgrade Expansion panels
first before upgrading the main i-Station.
E-Station
Drivers USB > ECLIPSE DRIVERS > Panel Software > E-
Station > xxxxxx-E-Station App (where xxxxxx represents
the product number).
Note:
Clear-Com recommends that you upgrade Expansion panels
first before upgrading the main E-station.
V-Series
Drivers USB > ECLIPSE DRIVERS > Panel Software > V-
Series > Main Board > xxxxxx-Panel Application
(where xxxxxx represents the product number).
V-Series Display
Module
The Display Module upgrade files (*.fwp format) are available
from the Drivers USB:
• Drivers USB > ECLIPSE DRIVERS > Panel_Software > V-
Series > Display_Module > xxxxxx-Display PIC Boot
Loader
• Drivers USB > ECLIPSE DRIVERS > Panel_Software > V-
Series > Display_Module > xxxxxx-Display PIC Application
Code