Clear-Com Eclipse HX series - Page 28

Eclipse | Upgrade Guide
Page 28
Order
System component
Upgrade procedure(s)
Notes
7
MVX-A16 card
7.2.2 Upgrading the MVX-A16 boot and app code using the Renesas
FDT
7.4 Upgrading the MVX-A16 MK I or MK II card FPGA with Xilinx
tools
Clear-Com recommends
upgrading the MVX boot and
application code using the
combined MVX boot and
application code file. See the
Drivers USB.
MK II (Blue) card only
8
Eclipse HX-PiCo
5.4.1 Upgrading the CPU card app code using EHX with
Ethernet connection
9
AES-6
No upgrade required
10
EHX configuration
software
4.2 Backing up your EHX 7.x/8.x/9.0 configurations
4.3 Installing EHX and Dynam-EC Clients
4.4 Importing your configurations into EHX
11
CPU card
5.4 Upgrading the CPU card application code
12
Dynam-EC
4.5 Updating
Dynam-EC is also installed as
part of the EHX/Dynam-EC
combined installer. This section
details how to install the Dynam-
EC client only on a machine i.e.
where only the dynamic online