User Guide| FreeSpeak II for Eclipse HX
3. Select the Wireless radio button. There are two further options:
n Automatic – select this option to automatically upgrade the beltpack when it is switched
on.
n Prompted – select this option to allow the beltpack user to confirm the upgrade.
4. Select Next, and then browse to the upgrade file (.fww) and select Open. The upgrade file is
loaded to the transceiver. The upgrade file is downloaded to all the connected beltpacks, and
the beltpacks automatically restart.
The transceivers store the beltpack upgrade files until they are power cycled or there is a black
reset.
You can track the status of the download in the EHX Event Log, and for beltpack upgrades the
upgrade status is also shown on the beltpack display.
Page 34
To Next Page
Loading...
Need help?
General
