User Guide| FreeSpeak II for Eclipse HX
2. Select the AES67 tab, and then deslect DHCP Enabled.
3. Enter the required static IP address, and then Apply Changes.
4. Click Close.
5. Navigate to Hardware > Transceivers.
6.
Click the cog icon for the required transceiver. The Transceiver Properties screen
appears.
7. Select Edit, and then deselect DHCP Enabled for both AES67 Admin and AES67 Audio.
Note: You cannot mix DHCP and static IP addressing on the IPT.
Page 63
To Next Page
Loading...
