833-3577 CB-FALCON SYSTEM OPERATOR INTERFACE
750-241 43 65-0296—01
Fig. 108. Setup settings changed.
When the user wants to clean the touch screen, the “CLEAN
SCREEN” button is selected to freeze touch input temporarily for
30 seconds to allow the user to clean the screen. (See Fig. 109.)
Fig. 109. Clean screen setup.
A countdown screen displays (Fig. 110) during the screen
disable period. It disappears when the touch screen is
re-enabled.
Fig. 110. Screen disabled for cleaning.
Pressing the “SYSTEM CONFIGURATION” button starts up
the system configuration. For more information, see “System
Configuration” on page 15.
Pressing the “ADVANCED SETUP” button starts the
Advanced Setup. For more information, see “Advanced
Setup” on page 48.
Parameters
A complete list of configurable parameters is shown in
Table 42.
Table 42. Configurable Parameters.
Parameter Comment
Table
#
Page
#
Boiler Name Name to identify boiler (up to 20
characters)
416
Installation Notes regarding installation (up
to 20 characters)
Installer
password
Change installer password
setting
OEM
password
Change OEM password setting
OEM ID OEM name to associate with
boiler (up to 20 characters)
To Next Page
Loading...
Need help?
General
