INSTALLATION MANUAL
CMA-5024 GLSSU
This document includes Proprietary Information and shall not be reproduced or communicated to third party
without prior written permission by CMC Electronics Inc.
Page 116
November 21, 2008
(J3) PIN SIGNAL NAME DESCRIPTION (FOR REFERENCE)
74 N/A (Do not connect) Future growth
75 N/A (Do not connect) Future growth
76 N/A (Do not connect) Future growth
77 N/A (Do not connect) Future growth
78 N/A (Do not connect) Future growth
79 N/A (Do not connect) Future growth
80 N/A (Do not connect) Future growth
81 N/A (Do not connect) Future growth
82 N/A (Do not connect) Future growth
83 N/A (Do not connect) Future growth
84 N/A (Do not connect) Future growth
85 N/A (Do not connect) Future growth
86 N/A (Do not connect) Future growth
87 N/A (Do not connect) Future growth
88 N/A (Do not connect) Future growth
89 N/A (Do not connect) Future growth
90 N/A (Do not connect) Future growth
91 N/A (Do not connect) Future growth
92 N/A (Do not connect) Future growth
93 N/A (Do not connect) Future growth
94 N/A (Do not connect) Future growth
95 N/A (Do not connect) Future growth
96 N/A (Do not connect) Future growth
97 N/A (Do not connect) Future growth
98 N/A (Do not connect) Future growth
99 N/A (Do not connect) Future growth
100 N/A (Do not connect) Future growth
71 N/A (Do not connect) Future growth
72 N/A (Do not connect) Future growth
73 N/A (Do not connect) Future growth
70 N/A (Do not connect) Future growth
69 N/A (Do not connect) Future growth
Figure 110. Pin Assignments for J3; Future Analog/Digital Interfaces
C. GENERAL INSTALLATION METHODS
Conforms to the Acceptable methods, techniques, and practices contained in AC 43.13-1B, to the
Acceptable Methods, Techniques and Practices - Aircraft Inspection and Repair in AC 43.13-2A, and to
the Acceptable Methods, Techniques, and Practices - Aircraft Alterations.
The document reference is online, please check the correspondence between the online documentation and the printed version.