INSTALLATION MANUAL
CMA-5024 GLSSU
This document includes Proprietary Information and shall not be reproduced or communicated to third party
without prior written permission by CMC Electronics Inc.
Page 401
November 21, 2008
SECTION V
SERVICING
There are no field adjustments and or calibration requirements for the CMA-5024 after initial installation.
Instructions for Continued Airworthiness (ICA) are not required.
Maintenance of nonfunctioning or malfunctioning components is limited to removal and replacement of CMC
Electronics Inc. factory supplied new or repaired components as described in the troubleshooting section of
the installation instructions.
The document reference is online, please check the correspondence between the online documentation and the printed version.