InteliLite 9 Global Guide
236
Setpoint group CM-Ethernet Related FW 1.1.0
Range [units] Valid IP address [-]
Default value 192.168.1.254 Alternative config NO
Step [-]
Comm object 24376 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint IP Address Mode (page
235)
Description
The setpoint is used to select the method how the IP Address is adjusted.
If IP Address Mode (page 235) is FIXED this setpoint is used to adjust the IP address of the ethernet interface
of the controller. Ask your IT specialist for help with this setting.
If IP Address Mode (page 235) is AUTOMATIC this setpoint is inactive. The IP address is assigned by the
DHCP server.
IP Address
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 1.1.0
Range [units] Valid IP address [-]
Default value 255.255.255.0 Alternative config NO
Step [-]
Comm object 24375 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint IP Address Mode (page
235)
Description
The setpoint is used to select the method how the Subnet Mask is adjusted.
If IP Address Mode (page 235) is FIXED this setpoint is used to adjust the Subnet Mask. Ask your IT
specialist for help with this setting.
If IP Address Mode (page 235) is AUTOMATIC this setpoint is inactive. The Subnet Mask is assigned by the
DHCP server.
Subnet Mask
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
