4-24 Compaq Server Console Switch User Guide
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number
1141555-002
File Name:
e-ch4 Using the OSD.doc
Last Saved On:
8/22/00 10:37 AM
To broadcast to selected computers:
1.
Select the keyboard and/or mouse box to receive keystrokes and/or
mouse movements.
2.
Click OK.
3.
Select Broadcast Active from the Commands screen to start
broadcasting.
To turn off broadcast mode, deselect Broadcast Active from the Commands
screen.
Broadcasting to Tiered Configurations
In a tiered system, you can broadcast to any combination of computers on the
entire system.
To broadcast to tiered configurations:
Setting Up Computers Attached to Secondary Switches
1.
From the Main screen, double-click the computer name or port number
of the secondary switch to which you want to broadcast; press Print
Scrn twice; the Main screen for the secondary switch displays.
2.
Click Setup | Broadcast.
3.
Check the keyboard and mouse box for each computer that receives
keystrokes and/or mouse movements, then click OK.
4.
From the Commands screen, select Broadcast Active to turn on the
broadcast mode for the secondary switch.
5.
Press Print Scrn to open the Main menu on the primary switch.
6.
Repeat steps 1 through 5 to send broadcast commands to computers
attached to additional secondary switches.
Setting Up Computers Attached to Primary Switches
1.
From the Main menu on the primary switch, click Setup | Broadcast.
2.
Check the keyboard and mouse for each computer that receives
keystrokes and/or mouse movements, then click OK.
3.
From the Commands screen, select Broadcast Active to turn on the
broadcast mode for the primary switch.
To Next Page
Loading...
General