5-10 Compaq Server Console Switch User Guide
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number:
141555-002
File Name:
f-ch5 Using the Simplified OSD.doc
Last Saved On:
8/22/00 10:40 AM
Values and Effects of Settings on Flag Appearance
Table 5-2
Flag Appearance Settings
Setting Values Effect
Enabled Flag Off Flag does not appear.
Ports On Indicates selected port number.
Names On Indicates selected computer by name.
Ports Timed Port number displays for 5 seconds
after switching.
Names Timed Name displays for 5 seconds after
switching.
Row 0 – 14 Positions the flag vertically on the
screen.
Column 0 – 25 Positions the flag horizontally on the
screen.
Color 0 – 7 Sets the flag color.
Text 0 – 7 Sets the flag text color.
Mode Opaque Makes the flag opaque.
Transparent Makes the flag transparent.
Scanning the Computers
In scan mode, the switch automatically switches from port to port (computer to
computer). You can scan the entire system sequentially or designate a custom
scan pattern by specifying computers and durations.
Placing the switch in scan mode
To place the switch in scanning mode:
1.
From the Commands menu in the Advanced Menus screen, move the
highlight to Scan.
2.
Press Enter.
To Next Page
Loading...
General