5-12 Compaq Server Console Switch User Guide
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number:
141555-002
File Name:
f-ch5 Using the Simplified OSD.doc
Last Saved On:
8/22/00 10:40 AM
Removing a computer from the scan list
To remove a computer from the scan list:
1.
In the Scan Pattern Setup screen, type the port number of the computer
to be removed.
or
If your computers are listed by name, type the first few letters of the
name of the computer.
2.
Move the highlight to the Sec column.
3.
Type 0 for the number of seconds.
Press Delete while in the Scan Pattern Setup screen to delete the
highlighted computer and all entries below it.
4.
Press Enter to save the settings and exit the menu; the new scan pattern
replaces the standard or previous custom scan pattern.
or
F10 to restore default settings.
or
Esc to exit the menu without saving the settings.
Securing Server Access
Advanced server applications should be protected against unauthorized users.
The switch security feature enables you to lock the keyboard and monitor,
requiring you to type a password before resuming operation. You can also set
a time delay before the system is locked.
You must always provide a password to access the fields in the Security
Configuration screen. After you type the correct password, the other fields on
the screen are activated.
To Next Page
Loading...
General