Compaq EO1002 - Flag Appearance Settings

Index 3
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number:
141555-002
File Name:
l-indexEng.doc
Last Saved On:
11/14/00 11:23 AM
F
failure
communication 4-9
FCC Class A compliance
notice A-2
FCC Class B compliance
notice A-3
features, Compaq Server Console
Switch 1-2
figures
Advanced Menus, Commands
(Simplified OSD) 5-3
Advanced Menus, Setup
(Simplified OSD) 5-4
Attaching the 2-Port side-
mount rails 2-3
Attaching the mounting
brackets to the front of the
rack 2-13
Attaching the mounting
brackets to the rear of the
rack 2-12
Attaching the side-mount
rails 2-6
Attaching the slide rail
brackets 2-8
Broadcast screen 4-23
Commands screen 4-7
Connecting the 2-Port KVM
cable 2-5
Connecting the wires 3-6
Device Modify screen 4-11
Device screen 4-10
Device Settings screen
(Simplified OSD) 5-17
Disconnecting the keyboard or
mouse cable 3-2
Dual console
configuration 1-5
Flag Configuration screen
(Simplified OSD) 5-9
Flag screen 4-17
Installing cage nut in the rear of
the rack 2-8
Measuring with the
template 2-11
Menu screen 4-13
Mounting the 2-Port unit to the
side of the rack 2-3
Mounting the unit to the side of
the rack 2-6
Names screen 4-12
OSD Main screen 4-5
Port Name Setup (Simplified
OSD) 5-6
Scan Pattern Setup screen
(Simplified OSD) 5-11
Scan screen 4-15
Securing the 2-Port side-mount
installation 2-4
Securing the rails 2-9
Securing the side-mount
installation 2-7
Security Configuration screen
(Simplified OSD) 5-13
Security screen 4-19
Selection screen (Simplified
OSD) 5-2
Setup screen 4-6
Single 4-Port unit 1-3
Sliding the switch box into the
rack 2-9
Sliding the switch box into the
rack-mount brackets 2-13
Tiered configuration 1-4, 3-9
Version screen 4-9
Wiring diagram 3-6
firmware
update, troubleshooting D-7
updating 1-3, E-1
version, viewing
information 4-8
flag appearance settings 5-10
Flag button 4-7
flag display
customizing 4-7
Flag screen
figure 4-17
functions 4-18