5-16 Compaq Server Console Switch User Guide
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number:
141555-002
File Name:
f-ch5 Using the Simplified OSD.doc
Last Saved On:
8/22/00 10:40 AM
To display version information and device settings:
1.
From the Commands menu in the Advanced Menus screen, move the
highlight to Version and press Enter; the Version screen appears.
VERSION
Firmware x.x.x
Hardware x x x
Dip Switch F
Port 1 COMPUTER 1
Keyboard Mouse
ENABLED DISABLED
Rate 2C Rate 100
LEDs 2 Res 2
Mode 2
Type 101 Type Gen
Figure 5-9. Version screen
2.
To display version information for an auxiliary device, press F2.
3.
Press Esc to close the Version screen.
Saving the Hardware Settings
Whenever you add or remove computers to or from the system, or whenever
you change the mouse or monitor, you should save the hardware settings. If
you do not save the settings, they are lost when power is lost or turned off, and
it might be necessary to reboot each computer to reestablish keyboard and
mouse communication.
To save the hardware settings:
1.
From the Commands menu in the Advanced Menus screen, highlight
Snapshot.
2.
Press Enter
.
To Next Page
Loading...
General