Using the On-Screen Display 4-27
Compaq Confidential – Need to Know Required
Writer:
John Turner
Project:
Compaq Server Console Switch User Guide
Comments:
Part Number:
1141555-002
File Name:
e-ch4 Using the OSD.doc
Last Saved On:
8/22/00 10:37 AM
Performing a Screen Capture
In the Server Console Switch system, pressing Print Scrn opens the OSD
Menus. To print a screen capture displayed by a computer, use the following
procedures:
■
On a computer connected to a primary switch: press Print Scrn
twice.
The first keystroke opens OSD menus in the primary switch. The second
keystroke clears the screen, sends the keystrokes through to the other
device, then captures or prints the screen.
■
On a computer connected to a secondary switch in a tiered
configuration: press Print Scrn four times. The first keystroke brings up
the OSD in the primary switch. The second keystroke brings up the
OSD in the secondary switch. The third keystroke brings up both OSDs.
The fourth keystroke clears the screen, then captures or prints the
screen.
To Next Page
Loading...
General