Contax U4R - Resetting All the DPOF Print Settings

Introduction Getting Ready Taking Pictures Playback Set Up
EN-126
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
4 Move the selector lever up u or down d
to select [INDEX], then move the lever
right r.
5 Move the selector lever up u to select
[SET UP INDEX PRINT] and press E.
Index printing is then set and the print settings screen reappears.
6 Press the MENU button K.
Resetting all the DPOF print settings
1 Turn the camera on and press the mode
buttons UD until "P" lights up on the
mode select LED.
2 Press the MENU button K to display the menu icons.
3 Move the selector lever left l or right r
to select DPOF [T] and press E.
The print settings screen appears.
BNote
• Selecting [ERASE INDEX SETTING] and pressing E deletes the index print settings
and returns you to the print settings screen.
• Select [RETURN] to return to the print settings screen.
INDEX
ALL RESET
EXECUTE
SET
PRINT SEL IMAGE
PRINT SETTINGS
RETURN
DPOF 2 PRTS
ON
INDEX SET
INDEX PRINT SETTINGS
SET UP INDEX PRINT
ERASE INDEX SETTING
RETURN
DPOF