Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-56
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Switching Between Macro and Landscape Mode
«Applicable mode: C/M»
Macro and Landscape modes help you select the best possible camera
settings for shots of close-up subjects and distant scenery.
1 With the camera ready to shoot in "C" or
"M" mode, press the Macro/Landscape
button O.
The camera changes between Macro and Landscape mode each time
the Macro/Landscape button O is pressed.
c Macro Mode
Macro mode allows you to take close-up pictures at distances as close as
approx. 20 cm (7.9")*
1
from the subject. Because the focal length of the lens
is locked in the wide-angle position (shortest focal length), the zoom does
not function.*
2
As flash mode, you can select either b Fill-in Flash mode, in which the flash
fires for every shot, or g Flash Off mode, in which the flash never fires.
(Æ p.63
)
*
1
Distance measured from the glass cover plate on the lens to the subject.
*
2
Only the digital zoom can be used.
A Important
This setting reverts to the default value when you turn the camera off.
BNote
You cannot change Macro/Landscape mode while in Twilight or Night View scene modes.
c
Macro
Normal
(Default)
Y
Landscape
OO
O
Approx.
20 cm
To Next Page
Loading...
