Contax U4R User Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-169
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[BEEP] Adjusting the Volume of the Camera Button Beep
Use this procedure to adjust the volume of the beep emitted when a camera
button is pressed or the camera is turned on.
1 Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2 Move the selector lever up u or down d
to select [BEEP], then move the lever
right r.
3 Move the selector lever up u or down d
to select the desired volume, then press
E.
The selected volume is applied.
[+3] : Maximum volume
[+2] : Medium volume (Default)
[+1] : Low volume
[OFF] : No button beep
BNote
This setting is retained when you turn the camera off.
BEEP
SHUTTER VOL
DIGITAL ZOOM
START SCREEN
REC REVIEW
+
2
+
2
ON
SET
2SEC
ENGLISH
SET UP(2/3)
LANGUAGE
+
3
+
2
+
1
+
1
OFFOFF
BEEP
SHUTTER VOL
DIGITAL ZOOM
START SCREEN
REC REVIEW
2SEC
ENGLISH
SET UP(2/3)
LANGUAGE

Contax U4R Specifications

General

Brand	Contax
Model	U4R
Category	Digital Camera
Language	English