Contax U4R User Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-172
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
3 Move the selector lever up u or down d
to select [SINGLE] or [MULTI], then press
E.
4 Move the selector lever left l to select
the CONTAX logo screen, then press E.
The CONTAX logo screen is configured, and an example of the startup
screen is displayed for 1 second before returning to the SET UP menu
screen.
To set a user-defined screen (SINGLE)
1 Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
The SET UP menu screen is displayed.
2 Move the selector lever up u or down d
to select [START SCREEN], then move the
lever right r.
BNote
This setting is retained when you turn the camera off.
A Important
Check that the memory card containing the images you want to use is inserted into the
camera.
MULTI
SINGLE
OFF
SELECT START SCREEN
RESET
SELECT START SCREEN
SELECT IMAGE
OK
BEEP
SHUTTER VOL
DIGITAL ZOOM
START SCREEN
REC REVIEW
+
2
+
2
ON
SET
2SEC
ENGLISH
SET UP(2/3)
LANGUAGE

Contax U4R Specifications

General

Brand	Contax
Model	U4R
Category	Digital Camera
Language	English