Crow PowerWave-64 - Page 75

Page 75
4 = Pendant chirps when armed
5 = Pendant chirps when in Stay Mode
6 = 2 sec pulse at set
7 = 2 sec pulse at unset
8 = Spare
P832E PARTITION "D" TIME AND DELAY OPTIONS -Default 0 Page 27
1 = set partition When Time Zone Ends
2 = Unset Partition When Time Zone Starts
3 = Disable Stay Mode Exit Delay
4 = Disable Set Mode Exit Delay
5 = Disable Stay Mode Entry Delay
6 = Disable Set Mode Entry Delay
7 = Use special Stay Mode entry timer
8 = Report Stay Mode alarms & Bypasses via dialler
Enabling Local PA Message Options
P833E 1 = Enable PA Disarm msg -Default = 0 Page 27
2 = Use Canned PA Disarm msg
3 = Repeat PA Disarm msg
4 = Spare
5 = Enable PA Armed msg
6 = Use Canned PA Armed msg
7 = Repeat PA Armed msg
8 = Spare
P834E 1 = Enable PA Stay Armed msg -Default = 0 Page 28
2 = Use Canned PA Stay Armed msg
3 = Repeat Stay PA Armed msg
4 = Spare
5 = Spare
6 = Spare
7 = Spare
8 = Spare
** Dialler Reporting Options for partition “D” **
P835E Area D reporting options -Default = 1,2 Page 29
1 = Send arm / disarm 5 = Send arm when exit delay expires (LED On)
2 = Send Stay Mode arm/disarm 6 = Send all zone restores at disarm only
3 = Send disarm only after activation's 7 = Spare
4 = Send Stay Mode disarm only after alarm 8 = Spare
** Area “D” Contact ID Account Code **
P836E Account number for Area "D" - default 0000 Page 29
**Area “D” Arm/Disarm Reporting Scenario **
P837E Area D Arm/Disarm reports mapped to scenario 1-4 default 1 Page 29
**Area “D” Child Disarm Reporting Scenario **
P838E Area D Child Disarm Reporting scenario 1-4 default 1 Page 30
Delays and Timers
P841E Area "A" exit delay - Default = 60 sec (0-999 sec) Page 40
P842E Area "B" exit delay - Default = 60 sec Page 40
P843E Area "C" exit delay - Default = 60 sec Page 40
P844E Area "D" exit delay - Default = 60 sec Page 40
P845E Area "A" Special Stay Mode entry delay - Default 20 sec (0-9999 sec) Page 40
P846E Area "B" Special Stay Mode entry delay - Default 20 sec Page 40
P847E Area "C" Special Stay Mode entry delay - Default 20 sec Page 40
P848E Area "D" Special Stay Mode entry delay - Default 20 sec Page 40
P849E Two trigger time period - Default 60 sec (0-999 sec) Page 40
Day zone to keypad and output timing