D-Link DFL-260E

Parameters opcode
packet_length
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.170. transfer_size_exceeded (ID: 00200370)
Default Severity WARNING
Log Message TFTPALG: Received bytes <received> exceeding allowed max value
<maxvalue>
Explanation Transferred bytes exceeding allowed value.Closing connection.
Gateway Action close
Recommended Action If connection should be allowed modify the filetransfersize option of
the TFTP Alg configuration .
Revision 1
Parameters received
maxvalue
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.171. options_removed (ID: 00200371)
Default Severity WARNING
Log Message TFTPALG: Options not allowed. Stripping options from packet
Explanation Options not allowed. Stripping options from packet.
Gateway Action rewrite
Recommended Action If options should be allowed modify the TFTP Alg configuration.
Revision 1
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.172. failed_strip_option (ID: 00200372)
Default Severity ERROR
Log Message TFTPALG: Failed to strip options , (internal error)
Chapter 2: Log Message Reference
113