unit
current_gpio
min_limit
max_limit
2.23.8. gpio_normal (ID: 04000042)
Default Severity WARNING
Log Message Temperature monitor <index> (<name>) is outside the specified
limit. Current value is <current_gpio> <unit>, lower limit is
<min_limit>, upper limit is <max_limit>
Explanation The sensor reports that the GPIO value is back inte the normal range.
Gateway Action None
Recommended Action None.
Revision 1
Parameters index
name
unit
current_gpio
min_limit
max_limit
2.23.9. free_memory_warning_level (ID: 04000101)
Default Severity WARNING
Log Message Free memory has fallen below the specified limit of
<limit_percentage> percent, limit classified is <severity>, free
<free_mem> MB of total <total_mem> MB, percentage free
<free_percentage>
Explanation The amount of free memory is getting low.
Gateway Action None
Recommended Action Review the configuration and disable or lower settings to reduce
memory consumption.
Revision 1
Parameters limit_percentage
total_mem
free_mem
free_percentage
severity
2.23.10. free_memory_warning_level (ID: 04000102)
Chapter 2: Log Message Reference
288
To Next Page
Loading...
