EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Default Severity NOTICE
Log Message SSL VPN user <username> logged in via <authsystem>.
Explanation An SSL VPN user has logged in to the SSL VPN user page.
Gateway Action None
Recommended Action None.
Revision 1
Parameters authsystem
username
userdb
server_ip
server_port
client_ip
client_port
2.56.39. activate_changes_failed (ID: 03204000)
Default Severity NOTICE
Log Message Bidirectional confirmation of the new configuration failed, previous
configuration will be used
Explanation The unit failed to establish a connection back to peer, using the new
configuration. The previous configuration will still be used.
Gateway Action using_prev_config
Recommended Action Make sure that the new configuration allows the unit to establish a
connection with the administration interface.
Revision 1
Parameters authsystem
2.56.40. accept_configuration (ID: 03204001)
Default Severity NOTICE
Log Message New configuration activated by user <username> from
<config_system> <client_ip>.
Explanation The new configuration has been successfully activated.
Gateway Action using_new_config
Recommended Action None.
Revision 1
Parameters username
userdb"
client_ip
Chapter 2: Log Message Reference
586

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals