D-Link DFL-260E

Default Severity ERROR
Log Message Malformed Remote IKE identity <remoteid> configured for tunnel
Explanation Malformed remote identity for PSK specified in configuration.
Gateway Action VPN_tunnel_invalid
Recommended Action Reconfigure_remote_id.
Revision 1
Parameters remoteid
2.31.130. malformed_psk_configured (ID: 01802071)
Default Severity ERROR
Log Message Malformed IKE secret (PSK) configured for tunnel
Explanation Malformed IKE secret specified in configuration.
Gateway Action VPN_tunnel_invalid
Recommended Action Reconfigure_PSK.
Revision 1
2.31.131. nat_mapping_changed_ipsec (ID: 01802080)
Default Severity INFORMATIONAL
Log Message NAT mapping changed, Local endpoint: <local_endpoint>, Remote
endpoint: <remote_endpoint>, New port: <port>, SPI: <esp_spi_in>.
Explanation NAT mappings changed for an IPsec SA.
Gateway Action updating_ipsec_sa
Recommended Action None.
Revision 1
Parameters local_endpoint
remote_endpoint
port
esp_spi_in
2.31.132. no_authentication_method_specified (ID: 01802100)
Default Severity ERROR
Log Message Neither pre-shared keys nor CA certificates nor EAP are specified for
a tunnel
Chapter 2: Log Message Reference
368