2.4. APPCONTROL
These log messages refer to the APPCONTROL (Application Control events) category.
2.4.1. application_identified (ID: 07200001)
Default Severity INFORMATIONAL
Log Message Application identified. Application: <application>.
Explanation An application protocol has been recognized by the application
control function.
Gateway Action None
Recommended Action None.
Revision 3
Parameters application
applicationrule
applicationruleset
Context Parameters Connection
Rule Information
2.4.2. application_identified (ID: 07200002)
Default Severity INFORMATIONAL
Log Message Application identified. Application: <application>.
Explanation An application protocol has been recognized by the application
control function.
Gateway Action close
Recommended Action None.
Revision 3
Parameters application
applicationrule
applicationruleset
Context Parameters Connection
Rule Information
2.4.3. application_end (ID: 07200003)
Default Severity INFORMATIONAL
Log Message Application ended. Application: <application>.
Chapter 2: Log Message Reference
184
To Next Page
Loading...
