2.10. BUFFERS
These log messages refer to the BUFFERS (Events regarding buffer usage) category.
2.10.1. buffers_flooded (ID: 00500001)
Default Severity WARNING
Log Message The buffers were flooded for <duration> seconds. Current usage is
<buf_usage> percent
Explanation The unit was temporarily out of buffers for a period of time. This
could be a result of a period of heavy network traffic load.
Gateway Action None
Recommended Action If this is a reoccurring event, try increasing the number of
HighBuffers.
Revision 1
Parameters duration
buf_usage
2.10.2. buffers_profile (ID: 00500002)
Default Severity DEBUG
Log Message Buffer requested by <reason> used at total of <duration> ticks and
was touched <numstop> times
Explanation A buffer associated with a profiling request has been identified. This
log message will only be generated by special built firmware for the
purpose of debugging.
Gateway Action None
Recommended Action Nothing.
Revision 1
Parameters numstop
duration
reason
Context Parameters Packet Buffer
Chapter 2: Log Message Reference
208
To Next Page
Loading...
