D-Link DFL-260E

peer: <remote_peer>
Explanation No user authentication rule avaliable for eap authentication.
Gateway Action eap_protocols_disabled
Recommended Action Reconfigure_tunnel.
Revision 1
Parameters remote_peer
2.31.72. no_radius_server_configured_for_eap (ID: 01800601)
Default Severity ERROR
Log Message No RADIUS server configured for EAP!
Explanation No RADIUS server configured for EAP!.
Gateway Action eap_authentication_will_fail
Recommended Action Reconfigure.
Revision 1
2.31.73. insufficient_resources_for_eap (ID: 01800602)
Default Severity ERROR
Log Message Insufficient resources for EAP protocol
Explanation Insufficient resources for EAP protocol.
Gateway Action eap_authentication_will_fail
Recommended Action None.
Revision 1
2.31.74. unknown_type_of_eap (ID: 01800603)
Default Severity ERROR
Log Message Unknown type of EAP protocol
Explanation Type of EAP authentication protocol unknown. EAP protocol not
accepted.
Gateway Action eap_authentication_will_fail
Recommended Action None.
Revision 1
Chapter 2: Log Message Reference
349