Gateway Action close
Recommended Action If unknown commands should be allowed, modify the FTPALG
configuration.
Revision 1
Parameters peer
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.86. illegal_command (ID: 00200212)
Default Severity WARNING
Log Message FTPALG: Failed to parse command from <peer> as a FTP command.
String=<string>. Closing connection
Explanation An invalid command was received on the control channel. This is not
allowed, and the connection will be closed.
Gateway Action close
Recommended Action If unknown commands should be allowed, modify the FTPALG
configuration.
Revision 1
Parameters peer
string
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.87. illegal_command (ID: 00200213)
Default Severity WARNING
Log Message FTPALG: Failed to parse command from <peer> as a FTP command.
String=<string>. Rejecting command
Explanation An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
Gateway Action rejecting_command
Recommended Action If unknown commands should not be allowed, modify the FTPALG
configuration.
Revision 1
Parameters peer
string
Chapter 2: Log Message Reference
80
To Next Page
Loading...
