D-Link DFL-260E

Log Message An audit event occured: <msg>. Internal severity level:
<int_severity>
Explanation An audit event occured in the IPsec stack.
Gateway Action None
Recommended Action None.
Revision 1
Parameters msg
int_severity
2.31.218. faild_to_link_ike_and_userauth (ID: 01803300)
Default Severity WARNING
Log Message Faild to link IKE SA with userauth object. No userauth object were
found for peer <peer> with IMSI <imsi>. The imported SA will be
destroyed.
Explanation Failed to link an imported IKE SA with an userauthentication object.
Gateway Action None
Recommended Action None.
Revision 1
Parameters peer
imsi
2.31.219. faild_to_find_userauthobject_for_ipsec_sa (ID:
01803302)
Default Severity NOTICE
Log Message No userauth object were found for IP <cfgmodeip> on iface <iface>.
The IPsec SA will not be imported.
Explanation Faild to find an userauth object when importing a IPsec SA. The
IPsec SA will not be imported.
Gateway Action None
Recommended Action None.
Revision 1
Parameters cfgmodeip
iface
2.31.220. modexp_accel_failed (ID: 01803400)
Chapter 2: Log Message Reference
394